Monday meanderings: "back to the grind" edition.

Monday, July 06, 2009 Filed in: General gun stuff, Revolvers, Ammunition, My Life

I hope everyone enjoyed their Independence Day holiday! I've been burning the candle at both ends lately, so I took a long weekend, during which I managed to overexpose myself to the sun. (The weekend was hot by Oregon standards - we hit 100 degrees at our house on Friday, and only slightly cooler on Thursday & Saturday.) What's that line - "feel the burn?"

---

Since it was so warm, I drank a huge amount of water. Having been in the ER more than once for severe dehydration (and accompanying heat exhaustion), I'm a little more attentive to this detail than most. For several years, my choice of liquid container has been the classic Nalgene bottle - the translucent white variety, made of #2 HDPE, free of those nasty plasticizers currently suspected of causing cancer. A side benefit is that HDPE is flexible, making it more suitable to hard use than the much more rigid clear varieties. This proved beneficial this weekend, when I ran over my Nalgene with a tractor. Smashed it nearly flat, and collapsed the bottom inward. I managed to squeeze the walls back into roughly cylindrical form, but wasn't able to fix the floor. I filled it with water, threw it in the freezer, and in a couple of hours the expanding ice did the trick! Good as new (more or less), and none the worse for wear.

I just wish they'd make the things in "earth colors" - OD, coyote tan, etc. Nalgene, are you listening?

---

The S&W "J" frame is a generally reliable piece, but lately I've gotten reports of ignition issues with newer examples. S&W has transitioned to a new firing pin, which is much lighter and much shorter than the previous varieties. (This may be their solution to the drop testing standards in California.) They seem to be the source of the problem.To insure reliability, I replace all those I encounter with the Cylinder & Slide Extra Length firing pin. Highly recommended, and an easy "do it yourself" modification for those so inclined.

---

The supply chain is finally starting to recover; AR-15 rifles are becoming a common sight in the stores again, and I'm receiving reports of ammo shelves being restocked. Shortages of certain products (most notably .380ACP ammunition) can be expected to continue for the next few months, but by and large we're starting to see the light at the end of the tunnel.


-=[ Grant ]=-

Tags:

|
© 2010 Grant Cunningham Click to email me!