I have no social media accounts; all purported ones are fake.

An unusual lubrication problem.

An unusual lubrication problem.

I get the most interesting phone calls!

A client who works for a public agency in California contacted me with a problem. As you may know, California has pretty strict ideas about what constitutes a carcinogen. Management in his agency won’t let him use any lubricants that contain “substances known to the state of California to cause cancer.” That, ladies and gentlemen, excludes most anti-wear and anti-corrosion additives!

After some consultation with experts, I was able to come up with a recommendation. In general, if you need a “clean” lubricant with good protection against wear and corrosion, look no further than lubes made for the food service industry!

They have to be non-toxic and non-staining, and since food production often involves contact with acids and liquids, they have to be very resistant to those substances as well. They also typically perform very well in colder temperatures and almost invariably are superb at corrosion resistance.

If you’ve read my article on lubricants, you know I’m a big fan of Lubriplate’s SFL series of greases, which are designed and approved for food service. Another good choice is their FGL series, which is a bit easier to get in the small quantities shooters use. If you prefer an oil, their FMO-AW series of oils (available in a wide variety of viscosities down to 5W) are a superb choice.

These products should also be fantastic choices for those who have allergic reactions to the additives present in other oils and greases.

In this case, I recommended the FGL grade 00 grease to my client. This is a very light, almost fluid grease with superb anti-wear and anti-corrosion properties. It should pass muster with even the most strict requirements that he has to meet!

-=[ Grant ]=-

  • Posted by Grant Cunningham
  • On January 24, 2007

Leave Reply